Skip to content

Update Manager (mintupdate) Crashes, Terminal Shows Warnings About "remote 'office-origin'" #1037

Closed

Description

@persistensk

Describe the bug

Running Update Manager from the Mint Menu or the Panel (when pinned) often results in crashes, or it does not run at all (the latter started happening today). In the past, Update Manager would just vanish midway through checking for updates or updating. Today, it just stopped running from the Menu or the Panel. Running it from a terminal today (i.e. running mintupdate) produces warnings in the terminal about being unable to find "remote 'office-origin'" (details below). I could not find anything about 'office-origin' in this context in this bug tracker or on the web in general.

Screenshots

I'd be happy to provide screenshots, but it's impossible to screenshot something that just vanishes or does not run at all. The problem is that it's not on the screen (or it's gone), so I cannot capture a screenshot of it. Any other suggestions for screenshots that would help are welcome. The warnings are in the terminal, so it's just text that I will paste below.

To Reproduce
Steps to reproduce the behavior:

  1. Click on the Mint Menu near the bottom left.
  2. Type Update Manager in the search box.
  3. Click on Update Manager icon.
  4. Today, it does nothing at all, after originally starting Update Manager, which later vanished from the screen.
  5. When it worked, it vanished suddenly in the middle of checking for updates or updating.
  6. Running mintupdate in Gnome-Terminal today produced the warnings pasted under Crash Reports below.

Expected behavior
Update Manager should run reliably without crashing, vanishing or producing warnings in a terminal.

Distribution:

  • Linux Mint
  • LMDE
  • Other (please specify)

Software version:
See Help > About in Update Manager.

mintUpdate 7.1.4

Logs:
Copy & paste the log output from Update Manager > View > Information here.

Note: this log was produced during the the second run of mintupdate from terminal today. While it seemed to work and updated one app, it produced the warning in the terminal again.

2026.03.15@17:01 ++ Launching Update Manager
2026.03.15@17:01 ++ Initial refresh will happen in 1 day(s), 0 hour(s) and 10 minute(s)
2026.03.15@17:01 ++ Inhibited power management
2026.03.15@17:01 ++ Checking for updates
2026.03.15@17:01 ++ Found 1 software updates
2026.03.15@17:01 ++ Refresh finished
2026.03.15@17:01 ++ Resumed power management
2026.03.15@17:10 ++ Will install flatpak com.microsoft.Edge
2026.03.15@17:10 ++ Inhibited power management
2026.03.15@17:10 ++ Install requested by user
2026.03.15@17:11 ++ Resumed power management
2026.03.15@17:11 ++ Inhibited power management
2026.03.15@17:11 ++ Checking for updates
2026.03.15@17:11 ++ System is up to date
2026.03.15@17:11 ++ Refresh finished
2026.03.15@17:11 ++ Resumed power management

Crash report:

Output in Gnome-terminal after running mintupdate from Gnome-terminal for the first time today:

mint-common (WARN): Could not mmap appstream xml file for remote 'office-origin': Error when getting information for file “/var/lib/flatpak/appstream/office-origin/x86_64/active/appstream.xml.gz”: No such file or directory
Flatpak: done generating updates
mint-common (WARN): Could not mmap appstream xml file for remote 'office-origin': Error when getting information for file “/var/lib/flatpak/appstream/office-origin/x86_64/active/appstream.xml.gz”: No such file or directory
mint-common (WARN): Could not update appstream for office-origin: Error updating appstream2: No such ref 'appstream2/x86_64' in remote office-origin; Error updating appstream: No such ref 'appstream/x86_64' in remote office-origin
mint-common (WARN): Could not mmap appstream xml file for remote 'office-origin': Error when getting information for file “/var/lib/flatpak/appstream/office-origin/x86_64/active/appstream.xml.gz”: No such file or directory
mint-common (WARN): Could not mmap appstream xml file for remote 'office-origin': Error when getting information for file “/var/lib/flatpak/appstream/office-origin/x86_64/active/appstream.xml.gz”: No such file or directory
Flatpak: done generating updates

Output in Gnome-terminal after running mintupdate the second time today:

mint-common (WARN): Could not mmap appstream xml file for remote 'office-origin': Error when getting information for file “/var/lib/flatpak/appstream/office-origin/x86_64/active/appstream.xml.gz”: No such file or directory
Flatpak: done generating updates

Additional context
Add any other context about the problem you think might be relevant.

  • Cinnamon version: 6.6.7+zena on X11.
  • Enabled graphics card: only integrated Intel (Device-1 below). - Nvidia card not enabled.
  • -Verified in Nvidia Optimus applet. Active profile: Intel (power saving mode)

From System Information app:

[code]
System:

  • Kernel: 6.17.0-19-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
  • Desktop: Cinnamon v: 6.6.7 tk: GTK v: 3.24.41 wm: Muffin v: 6.6.3 vt: 7 dm: LightDM v: 1.30.0
  • Distro: Linux Mint 22.3 Zena base: Ubuntu 24.04 noble
  • Machine:
  • Type: Convertible System: Dell product: Inspiron 16 7620 2-in-1 v: N/A
  • serial: Chassis: type: 31 serial:
  • Mobo: Dell model: 0FD3D2 v: A00 serial: part-nu: 0B37
  • uuid: UEFI: Dell v: 1.12.1 date: 05/09/2023
  • Battery:
  • ID-1: BAT0 charge: 57.3 Wh (100.0%) condition: 57.3/87.0 Wh (65.8%) volts: 12.3 min: 11.4
  • model: SMP DELL 817GN98 type: Li-poly serial: status: full
  • CPU:
  • Info: 12-core (4-mt/8-st) model: 12th Gen Intel Core i7-1260P bits: 64 type: MST AMCP
  • smt: enabled arch: Alder Lake rev: 3 cache: L1: 1.1 MiB L2: 9 MiB L3: 18 MiB
  • Speed (MHz): avg: 1432 high: 4100 min/max: 400/4700:3400 cores:
  • 1: 400 2: 400 3: 400 4: 400 5: 2722 6: 400 7: 4100 8: 400 9: 2207 10: 3151 11: 2649 12: 3402 13: 400 14: 400 15: 400 16: 1093
  • bogomips: 79872
  • Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  • Graphics:
  • Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Dell driver: i915 v: kernel
  • arch: Gen-12.2 ports: active: eDP-1 off: DP-5 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1
  • bus-ID: 0000:00:02.0 chip-ID: 8086:46a6 class-ID: 0300Device-2: NVIDIA TU117M [GeForce MX550] vendor: Dell driver: N/A arch: Turing
  • bus-ID: 0000:01:00.0 chip-ID: 10de:1f9f class-ID: 0302
  • Device-3: Microdia Integrated_Webcam_FHD driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
  • lanes: 1 bus-ID: 3-6:3 chip-ID: 0c45:6a1d class-ID: 0e02
  • Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: modesetting
  • unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  • Screen-1: 0 s-res: 3840x2400 s-dpi: 96 s-size: 1016x635mm (40.00x25.00")
  • s-diag: 1198mm (47.17")
  • Monitor-1: DP-5 mapped: DP-2-3 note: disabled model: Asus VP228 serial: res: N/A
  • dpi: 102 size: 476x268mm (18.74x10.55") diag: 546mm (21.5") modes: max: 1920x1080 min: 720x400
  • Monitor-2: eDP-1 pos: primary model: Samsung 0x4164 res: 3840x2400 hz: 60 dpi: 284
  • size: 344x215mm (13.54x8.46") diag: 406mm (16") modes: 3840x2400
  • API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
  • drv: iris surfaceless: drv: iris x11: drv: iris inactive: wayland
  • API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.2.8-0ubuntu0.24.04.1 glx-v: 1.4
  • direct-render: yes renderer: Mesa Intel Iris Xe Graphics (ADL GT2) device-ID: 8086:46a6
  • API: Vulkan v: 1.3.275 layers: 8 surfaces: xcb,xlib device: 0 type: integrated-gpu driver: N/Adevice-ID: 8086:46a6 device: 1 type: cpu driver: N/A device-ID: 10005:0000
  • Audio:
  • Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Dell driver: sof-audio-pci-intel-tgl bus-ID: 0000:00:1f.3 chip-ID: 8086:51c8 class-ID: 0401
  • API: ALSA v: k6.17.0-19-generic status: kernel-api with: osspd status: active
  • Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
  • 2: wireplumber status: active
  • Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse)
  • Network:
  • Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 0000:00:14.3
  • chip-ID: 8086:51f0 class-ID: 0280
  • IF: wlp0s20f3 state: up mac:
  • Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB rev: 3.2
  • speed: 5 Gb/s lanes: 1 bus-ID: 2-2.4:4 chip-ID: 0bda:8153 class-ID: 0000 serial:
  • IF: enx605b301a665c state: down mac:
  • Bluetooth:
  • Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
  • bus-ID: 3-10:5 chip-ID: 8087:0033 class-ID: e001
  • Report: hciconfig ID: hci0 rfk-id: 0 state: up address: bt-v: 5.3 lmp-v: 12
  • sub-v: 363c hci-v: 12 rev: 363c class-ID: 7c0000
  • RAID:
  • Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6 port: N/A
  • bus-ID: 0000:00:0e.0 chip-ID: 8086:467f rev: class-ID: 0104
  • Drives:
  • Local Storage: total: 953.87 GiB used: 183.74 GiB (19.3%)
  • ID-1: /dev/nvme0n1 model: CL4-3D1024-Q11 NVMe SSSTC 1024GB size: 953.87 GiB speed: 63.2 Gb/s
  • lanes: 4 tech: SSD serial: fw-rev: 25301116 temp: 26.9 C scheme: GPT
  • Partition:
  • ID-1: / size: 238.26 GiB used: 183.55 GiB (77.0%) fs: ext4 dev: /dev/nvme0n1p8
  • ID-2: /boot/efi size: 196 MiB used: 193.5 MiB (98.7%) fs: vfat dev: /dev/nvme0n1p1
  • Swap:
  • ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
  • USB:
  • Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s lanes: 1
  • chip-ID: 1d6b:0002 class-ID: 0900
  • Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 20 Gb/s lanes: 2 chip-ID: 1d6b:0003
  • class-ID: 0900
  • Hub-3: 2-2:2 info: Realtek Dell dock ports: 4 rev: 3.1 speed: 10 Gb/s lanes: 1
  • chip-ID: 0bda:0487 class-ID: 0900
  • Hub-4: 2-2.3:3 info: Realtek Dell dock ports: 4 rev: 3.1 speed: 5 Gb/s lanes: 1
  • chip-ID: 0bda:0413 class-ID: 0900
  • Device-1: 2-2.4:4 info: Realtek RTL8153 Gigabit Ethernet Adapter type: Network driver: r8152
  • interfaces: 1 rev: 3.2 speed: 5 Gb/s lanes: 1 power: 112mA chip-ID: 0bda:8153 class-ID: 0000
  • serial:
  • Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s lanes: 1
  • chip-ID: 1d6b:0002 class-ID: 0900
  • Device-1: 3-5:2 info: Shenzhen Goodix USB2.0 MISC type: driver: N/A
  • interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 27c6:639c class-ID: ef00
  • serial:
  • Device-2: 3-6:3 info: Microdia Integrated_Webcam_FHD type: video driver: uvcvideo interfaces: 4
  • rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 0c45:6a1d class-ID: 0e02
  • Hub-6: 3-8:4 info: Realtek Dell dock ports: 5 rev: 2.1 speed: 480 Mb/s lanes: 1
  • chip-ID: 0bda:5487 class-ID: 0900
  • Device-1: 3-8.2:6 info: Apple Apple Watch Magnetic Charging Cable type: HID driver: usbhid
  • interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 500mA chip-ID: 05ac:0503 class-ID: 0300
  • serial:
  • Hub-7: 3-8.3:7 info: Realtek Dell dock ports: 6 rev: 2.1 speed: 480 Mb/s lanes: 1
  • chip-ID: 0bda:5413 class-ID: 0900
  • Device-1: 3-8.3.2:9 info: Microsoft Ergonomic Mouse type: mouse,HID driver: hid-generic,usbhid
  • interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 045e:082e class-ID: 0300
  • serial:
  • Device-2: 3-8.3.3:10 info: Incase Wired Ergonomic Keyboard type: keyboard,HID
  • driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: 100mA
  • chip-ID: 3741:082c class-ID: 0300 serial:
  • Device-3: 3-8.3.5:11 info: Dell dock type: HID driver: hid-generic,usbhid interfaces: 1
  • rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA chip-ID: 413c:b06f class-ID: 0300
  • Device-4: 3-8.5:8 info: Dell Dock WD19S type: HID driver: hid-generic,usbhid interfaces: 2
  • rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA chip-ID: 413c:b06e class-ID: 0300 serial:
  • Device-5: 3-10:5 info: Intel AX211 Bluetooth type: bluetooth driver: btusb interfaces: 2
  • rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0033 class-ID: e001
  • Hub-8: 4-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
  • class-ID: 0900
  • Sensors:
  • System Temperatures: cpu: 48.0 C mobo: 45.0 C sodimm: SODIMM C
  • Fan Speeds (rpm): cpu: 0
  • Repos:
  • Packages: 3979 pm: dpkg pkgs: 3911 pm: flatpak pkgs: 51 pm: snap pkgs: 17
  • No active apt repos in: /etc/apt/sources.list
  • Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
  • 1: deb https: //mirror.csclub.uwaterloo.ca/linuxmint-packages zena main upstream import backport
  • 2: deb http: //archive.ubuntu.mirror.rafal.ca/ubuntu noble main restricted universe multiverse
  • 3: deb http: //archive.ubuntu.mirror.rafal.ca/ubuntu noble-updates main restricted universe multiverse
  • 4: deb http: //archive.ubuntu.mirror.rafal.ca/ubuntu noble-backports main restricted universe multiverse
  • 5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
  • Info:
  • Memory: total: 16 GiB note: est. available: 15.31 GiB used: 4.82 GiB (31.5%)
  • Processes: 397 Power: uptime: 45m states: freeze,mem,disk suspend: s2idle wakeups: 0
  • hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
  • Compilers: gcc: 13.3.0 alt: 11/12 Client: Unknown python3.12 client inxi: 3.3.34
    [/code]

Locale:
If the problem is with text not getting displayed correctly, paste the output of the terminal command locale.

LANG=en_CA.UTF-8
LANGUAGE=en_CA:en
LC_CTYPE="en_CA.UTF-8"
LC_NUMERIC="en_CA.UTF-8"
LC_TIME="en_CA.UTF-8"
LC_COLLATE="en_CA.UTF-8"
LC_MONETARY="en_CA.UTF-8"
LC_MESSAGES="en_CA.UTF-8"
LC_PAPER="en_CA.UTF-8"
LC_NAME="en_CA.UTF-8"
LC_ADDRESS="en_CA.UTF-8"
LC_TELEPHONE="en_CA.UTF-8"
LC_MEASUREMENT="en_CA.UTF-8"
LC_IDENTIFICATION="en_CA.UTF-8"
LC_ALL=

Activity

  1. persistensk commented on Mar 15, 2026

    @persistensk
    Author

    I'd also like to know:

    1. What is "office-origin"?
    2. How to remove it from the relevant file or list, if that's the solution.

    Thank you in advance for looking into this bug. Please let me know if you need any additional info.

  2. persistensk commented on Mar 15, 2026

    @persistensk
    Author

    I ran this in Gnome-terminal: flatpak repair
    Output:

    Working on the system installation at /var/lib/flatpak
    Privileges are required to make changes; assuming --dry-run
    [142/143] Verifying [...]
    Checking remotes...
    Remote office-origin for ref app/com.collabora.Office/x86_64/master is disabled
    

    The mention of "Office" could be a coincidence or a clue.

    Software Manager does not list Collabra even with "Show unverified flatpacks" enabled. It was from https://flathub.org/en/apps/com.collaboraoffice.Office
    where it says,
    "by Collabora Productivity Limited
    collaboraoffice.com" with a blue check-mark.

    Comments welcome.

  3. mtwebster commented on Mar 15, 2026

    @mtwebster
    Member

    Fixed by linuxmint/mintcommon@864a78d

    You can disable flatpak updates in mintupdate to avoid the issue for now, or, unless you're still using that flatpak app, remove that remote using the flatpak commandline:

    flatpak remote-delete office-origin
    
  4. persistensk commented on Mar 16, 2026

    @persistensk
    Author

    @mtwebster Thank you for the quick reply. I have two questions, one about flatpak updates and the other about mintupdate crashing:

    1. I'd like to keep Collabra Office and other flatpak apps up to date, at least to keep up with security updates. Is there a different solution, other than disabling updates?

    2. My larger problem is that mintupdate often crashes and vanishes from the screen mid-function. I thought that the warnings were a clue, but could the crashes have a different cause?

    You mentioned "Fixed by linuxmint/mintcommon@864a78d". It says, "It fails safely but ends up printing a lot of unnecessary warnings." Again, my problem is that mintupdate does not fail safely. It crashes and vanishes from the screen.

    Is there a way to troubleshoot and fix that?

    Thanks in advance.

  5. mtwebster commented on Mar 16, 2026

    @mtwebster
    Member

    I'm not sure why it's crashing for you - in my testing it gave warnings but never crashed.

    You can still update with the flatpak commandline tool flatpak update, or enable automatic updates in mintupdate's preferences' 'Automation' tab (which runs that in the background, and is independent of mintupdate's listings).

    You could install the auto-build from mintcommon's repo:
    https://github.com/linuxmint/mintcommon/releases/tag/master.mint22

    It contains an additional, related fix.

    Download the 'packages.tar.gz' file, unpack the .deb package, and double-click it to launch the package installer, or, open a terminal and run sudo dpkg -i *.deb in that folder.

    I'll see about possibly getting a point release out for this.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions